WAEC GCE Technical Drawing 2025 Past Questions and Answers | Free Practice Guide

by

Preparing for the WAEC GCE Technical Drawing 2025 examination requires focus, practice, and proper study of past questions. Technical Drawing (TD) is one of the core subjects for candidates in the technical, vocational, and engineering-related tracks. It tests a candidate’s ability to visualize, represent, and interpret objects graphically through drawings, plans, and diagrams.WAEC GCE Technical Drawing 2025 Past Questions and Answers | Free Practice GuideThis guide provides an overview of the exam structure, sample practice questions with answers, and key tips to help you achieve success in your forthcoming examination.

SEE ALSO; WAEC GCE Metal Work 2025 Practice Questions and Answers | Past Questions & Exam Guide

 Overview of WAEC GCE Technical Drawing Exam

The Technical Drawing exam is designed to test candidates’ knowledge in:

  • Basic principles of engineering and architectural drawings

  • Geometrical constructions

  • Orthographic and isometric projections

  • Building and mechanical drawings

  • Understanding of symbols, line work, and scaling

The exam usually consists of two main papers:

  1. Paper 1 (Objective): Multiple-choice questions covering general principles, theory, and graphical concepts.

  2. Paper 2 (Essay/Practical): Structured and drawing-based questions requiring detailed sketches, projections, and designs.

 Sample WAEC GCE Technical Drawing 2025 Practice Questions

Below are some sample practice questions with suggested answers to guide you.

Section A – Objective Questions

1. Which of the following instruments is used for drawing circles and arcs?
a) Divider
b) Protractor
c) Compass
d) T-square

Answer: c) Compass

2. In first-angle projection, the object is placed in which quadrant?
a) First quadrant
b) Second quadrant
c) Third quadrant
d) Fourth quadrant

Answer: a) First quadrant

3. The recommended scale for site plans is usually:
a) 1:10
b) 1:50
c) 1:100
d) 1:500

Answer: d) 1:500

4. Which type of line is used to show hidden details in technical drawings?
a) Continuous thick line
b) Dashed line
c) Chain thin line
d) Zig-zag line

Answer: b) Dashed line

Section B – Essay/Practical Questions

Question 1:
Draw the orthographic projections (front view, side view, and plan) of a simple rectangular block measuring 100mm × 60mm × 40mm.

Suggested Answer:

  • The front view should show a rectangle of 100mm by 40mm.

  • The plan view will be 100mm by 60mm.

  • The side view will be 60mm by 40mm.

Question 2:
Construct a regular hexagon with a side length of 40mm.

Suggested Steps:

  1. Draw a horizontal baseline of 40mm.

  2. With a compass, set the radius to 40mm and mark arcs from each end of the baseline.

  3. Continue marking equal arcs around the circle until six points are obtained.

  4. Join the points to form a hexagon.

Question 3:
Draw the isometric view of a cube with sides 60mm.

Suggested Steps:

  1. Start with vertical and 30° inclined lines.

  2. Construct a rhombus with equal 60mm sides.

  3. Project upward 60mm along the verticals.

  4. Complete the cube with parallel lines.

Question 4:
Using suitable construction, divide a straight line AB (120mm) into six equal parts.

Suggested Steps:

  1. Draw AB = 120mm.

  2. From A, draw a ray at an acute angle.

  3. Mark six equal divisions along the ray using a compass.

  4. Join the last division point to B.

  5. Draw parallels from each division to intersect AB.

  6. AB is now divided into six equal parts.

Tips for Passing WAEC GCE Technical Drawing 2025

  1. Master Drawing Instruments
    – Learn how to use the compass, protractor, divider, T-square, and set squares efficiently.

  2. Understand Line Conventions
    – Continuous thick line (visible edges), dashed line (hidden details), chain line (centerlines).

  3. Practice Past Questions Regularly
    – Familiarity with past WAEC patterns improves speed and accuracy.

  4. Work Neatly and Accurately
    – Examiners reward neat, clear, and well-labeled drawings.

  5. Time Management
    – Spend less time on objectives to allow more focus on the drawing section.

  6. Use Recommended Materials
    – Invest in good-quality drawing paper, sharp pencils (HB, 2H), and an eraser.

Conclusion

Technical Drawing in WAEC GCE 2025 is an opportunity to showcase your ability to communicate ideas through graphics. With consistent practice, proper understanding of past questions, and attention to detail, you can perform excellently.

Remember, success in Technical Drawing depends not just on knowledge but also on accuracy, speed, and neat presentation.

⚠️ Disclaimer

This article provides practice questions and study tips for educational purposes only. It does not claim to provide the exact WAEC GCE Technical Drawing 2025 questions. Candidates are advised to use this content as a study guide alongside official WAEC resources.

Visit waec official website here;https://registration.waecdirect.org/

Leave a Comment